Series 651000 SSOP-to-DIP Adapter
FEATURES * Allows the use of 0.65mm pitch surface-mount ICs in thru-hole designs. * Ideal for prototyping and testing/evaluating SSOP ICs. * Adapter can be cut to smaller sizes by end user. * Consult factory for Panelized Form or for mounting of consigned ICs. GENERAL SPECIFICATIONS * ADAPTER BODY: FR-4, 0.062 [1.58] thick, with 1-oz. Cu traces * PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M * PIN PLATING: 200 [5.08] Sn/Pb 93/7 per ASTM B579-73 over 100 [2.54] Ni per SAE AMS-QQ-N-290 * CURRENT RATING: 1 amp * OPERATING TEMPERATURE: 221F [105C] MOUNTING CONSIDERATIONS * SUGGESTED PCB HOLE SIZE: 0.028 0.003 [0.71 0.08] dia. * Will plug into standard IC socket
CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice.
ORDERING INFORMATION XX-651000-10-P
ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: 0.005 [0.13] UNLESS OTHERWISE SPECIFIED
No. of Pins 14, 16, 18, 20, 24, 36 Series
Optional Panelized Version
Bristol, PA 19007-6810 USA TEL (215) 781-9956 * FAX (215) 781-9845 WWW.ARIESELEC.COM * INFO@ARIESELEC.COM
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
18037 Rev. AA
|
